Maxoline-logo-300

Print

Hydra Oil ISO VG 100

Hydra Oil ISO VG 100
This product was rated through our customers

MAXOLINE Hydra Oil ISO VG 100 is produced from high grade solvent neutral base oils and suitable EP additive and anti-foam package. It is an EP hydraulic oil for use in heavy duty hydraulic equipments, gear boxes and bearings. It may also be used as a lubrication medium in lubrication systems and vacuum pumps. This fluid is NOT compatible in systems, containing parts or equipment with a silver lining.

Why one should use Hydra Oil ISO VG 100

- Excellent protection against wear
- Very good activity against rust and corrosion
- Excellent stability against oxidation
- Very good demulsification properties
- Very good deaerating and foam-suppressing properties
- Good compatibility with seals and gaskets made from synthetic material
- Low pour point

Specifications

  • Specific Gravity 15°C: 0,884
  • Viscosity 40 °C mm²/s: 100
  • Viscosity 100 °C mm²/s: 11,00
  • Viscosity Index (V.I.): 97
  • Flash Point °C: 234
  • Pour Point °C: -20
  • Acid number, mgKOH/g: 0,40
  • Sulphate Ash, %: 0,06

Performance Level

DIN 51524-2 HLP, AFNOR NF E 48-603 HM, ISO 11158 HM, ASTM D 6158 HM

H.S.code

27.10.19.83
CAAS115/4104
The data published are to our best knowledge the correct information. We reserve the right to alter the specifications any time and without prior notice.

Contact Information

  • Maxoline

    The lubricants specialist from the Netherlands

    • Fokkinkweg 19
    • Hengelo Bronckhorst (Gld)
    • 7255 AJ
    • Netherlands
    • T: +31 575 46 12 13
    • F: +31 575 74 18 01
    • E: This email address is being protected from spambots. You need JavaScript enabled to view it.
TIP!

Do you know these New Maxoline products already?

  • Synthetic Compressor Oil ISO VG 100 (PAO)

    Synthetic Compressor Oil ISO VG 100 (PAO)

    Synthetic Compressor Oil ISO VG 100 (PAO) is a high quality fully synthetic compressor oil based on PAO base oils, with a natural high resistance against oxidation, to which a complete additive package has been added. Recommended for oil-flooded rotary sliding-vane and screw-type compressors, even in the most severe conditions. This oil has low carbon-forming tendencies and minimises the formation of deposits in the discharge system at the temperature range where these compressors operate. Due to the high quality of this compressor oil, mostly the service interval can be extended.
  • HD Brake Fluid DOT 5.1

    HD Brake Fluid DOT 5.1

    MAXOLINE HD Brake Fluid DOT 5.1, is a high performance Brake and Clutch Fluid, a mixture of polyalkylene glycols, glycolethers and suitable additive package, to be used in hydraulic brake systems. Meeting international specifications such as: SAE J1703 SAE 1704 (latest issue), FMVSS 116 / DOT 5.1 and ISO 4925 class 5-1 specifications.
    • Always check requirements in manual of equipment builder!
    • Do not mix with silicone or silicate ester type products!
  • Regular Oil SAE 40

    Regular Oil SAE 40

    MAXOLINE Regular Oil SAE 40, also known as Commercial Motor Oil is a blend of HVI Base Oils. It is extremely resistant against aging. Suitable for general lubrication under mild conditions, such like bearings of pumping stations, circulating systems and for topping-up of certain classic cars engines.

Line-up of our various packings

Customer Login

Customers Only