Maxoline-logo-300

Lithium Complex Grease NLGI 2

This product was rated through our customers

MAXOLINE Lithium Complex Grease NLGI 2, developed for the lubrication all anti-friction and plain bearings for industrial as well as automotive applications. The grease is, because of its exceptional performance, suitable for extended relubrication intervals and a wide operating temperature range.

Why one should use Lithium Complex Grease NLGI 2

  • Exceptional mechanical stability extends lubrication intervals.
  • Excellent oxidation stability provides lasting lubrication at high temperatures.
  • Excellent EP and anti-wear performance.
  • Good corrosion resistance protects components operating in wet conditions.

Specifications

  • Colour: Red
  • Base Oil: Mineral Base Oil
  • Oil Seperation % 7 Days 40 °C IP 121: max 5
  • Worked Penetration 60 strokes: 265 - 295
  • Temperature for use °C: -20 - + 150
  • Water washout % IP 215: 3
  • Shell Four Ball weld Load kg IP 239: 450
  • Copper Corrosion Test IP 112: Pass
  • Emcor Test: 0:0
  • Dropping Point °C ASTM D2265: >250
  • Soap: Lithium Complex
  • Oil Seperation % 7 Days 40 °C IP 121: max 5
  • Appearance: Smooth
  • NLGI Number: 2
  • The data published are to our best knowledge the correct information. We reserve the right to alter the specifications any time and without prior notice.

CAA Number

CAAP082/48249

H.S. Code

27.10.19.99

Contact Information

  • Maxoline

    • Fokkinkweg 19
    • Hengelo Bronckhorst (Gld)
    • 7255 AJ
    • Netherlands
    • T: +31 575 46 12 13
    • F: +31 575 74 18 01
    • E: This email address is being protected from spambots. You need JavaScript enabled to view it.
TIP!

Do you know these New Maxoline products already?

  • Soluble Cutting Oil Extra

    Soluble Cutting Oil Extra

    MAXOLINE Soluble Cutting Oil Extra is a sophisticated metal working fluid based on high quality solvent refined base oils and a suitable additive package. The ratio to be used is in practise 1 part oil to 9 parts water. Stir thoroughly to obtain a very stable emulsion. To be used for machining all normal metals. After a certain time and in certain conditions it can be necessary to add an extra bactericide to the system.

    Always add the metal working fluid to the water and not in the reverse order!

    Must be stored inside and above 0 degrees Celsius!

    Because of stability consume with one year!

Customer Login

Customers Only