Maxoline-logo-300

Mixfleet ExtraS Motor Oil 20W50 CH-4/SJ

This product was rated through our customers

MAXOLINE Mixfleet ExtraS Motor Oil 20W50 CH-4/SJ is produced with special solvent refined base oils and adequate additive package. Suitable for gasoline or diesel engines, with or without super-charging, for application in mixed fleets.

Why one should use Mixfleet ExtraS Motor Oil 20W50 CH-4/SJ

Superior product with the following properties:
- a good detergency prevents deposits in the engine
- a good dispersion that prevents from precipitation and sludge
- a powerful action against wear, corrosion and foam
- a stable viscosity index
- low ash contents

Specifications

  • Specific Gravity 15°C: 0,888
  • Viscosity 40 °C mm²/s: 154
  • Viscosity -15 °C, mPa.s: 7600
  • Viscosity 100 °C mm²/s: 17,28
  • Viscosity Index (V.I.): 121
  • Flash Point °C: 224
  • Pour Point °C: -28
  • Total Base Number mgKOH/g: 10
  • SAE: 20W50
  • Sulphate Ash, %: 1,22

Performance Level

API CH-4/SJ, ACEA A3-98, B3-98, E2-96 Meets the requirements of MB 228.1 and MAN 271

H.S.code

27.10.19.81
CAAR189/31152A

The data published are to our best knowledge the correct information. We reserve the right to alter the specifications any time and without prior notice.

Contact Information

  • Maxoline

    • Fokkinkweg 19
    • Hengelo Bronckhorst (Gld)
    • 7255 AJ
    • Netherlands
    • T: +31 575 46 12 13
    • F: +31 575 74 18 01
    • E: This email address is being protected from spambots. You need JavaScript enabled to view it.
TIP!

Do you know these New Maxoline products already?

  • Silicone Oil 100 - 5223

    Silicone Oil 100 - 5223

    MAXOLINE high grade Silicone Oil 100 - 5223 is a 100% PDS (=Poly Dimethyl Siloxan), are insoluble in almost all petroleum systems. It is essntially a non-toxic product. To be applied/used for a wide range of applications: As a lubricating product, as a release agent, as an anti-foam agent, as mechanical fluid, in electronic equipment, etc.
  • Turbine Oil R&O ISO VG 68

    Turbine Oil R&O ISO VG 68

    MAXOLINE Turbine Oil R&O ISO VG 68 is a universal mineral turbine oil, based on specially selected solvent-refined base oils. Especially formulated to satisfy the demanding requirements of modern high output steam turbines, including gear units. This oil is also recommended for industrial-type gas turbines. In addition to turbine applications, this oil may also be used to lubricate hydraulic systems, compressors, high-speed gears, certain oil lubricated bearings and other applications requiring high quality rust and oxidation inhibited oils which separate readily from water.
  • Industrial Gear Lube EP 150

    Industrial Gear Lube EP 150

    MAXOLINE Industrial Gear Lube EP 150 is a mineral oil based Gear Oil. The additive package is absolutely lead free. * Always check requirements in manual of equipment builder!
  • Soluble Cutting Oil Extra

    Soluble Cutting Oil Extra

    MAXOLINE Soluble Cutting Oil Extra is a sophisticated metal working fluid based on high quality solvent refined base oils and a suitable additive package. The ratio to be used is in practise 1 part oil to 9 parts water. Stir thoroughly to obtain a very stable emulsion. To be used for machining all normal metals. After a certain time and in certain conditions it can be necessary to add an extra bactericide to the system.

    Always add the metal working fluid to the water and not in the reverse order!

    Must be stored inside and above 0 degrees Celsius!

    Because of stability consume with one year!

Customer Login

Customers Only