Maxoline-logo-300

Mono Ethylene Glycol

This product was rated through our customers

Mono Ethylene Glycol Industrial Grade

Why one should use Mono Ethylene Glycol

Specifications

  • Appearance: Clear and free from suspended matter
  • Purity, %w: Min 99,3
  • Colour, Pt-Co: ASTM D1209 Max. 5
  • Water % m/m: ASTM E1064 Max 0,05
  • Diethylene Glycol %m/m: Max 0,05
  • Ash ppmw: ASTM D482 Max. 0,05
  • Acidity as acetic acid % m/m: ASTM D1613 Max. 0,001
  • Distillation, DP °C ASTM D1078: Max 200 °C
  • Distillation, IBP °C ASTM D1078: Min. 195 °C

CAAS354/90791

The data published are to our best knowledge the correct information. We reserve the right to alter the specifications any time and without prior notice.

Contact Information

  • Maxoline

    • Fokkinkweg 19
    • Hengelo Bronckhorst (Gld)
    • 7255 AJ
    • Netherlands
    • T: +31 575 46 12 13
    • F: +31 575 74 18 01
    • E: This email address is being protected from spambots. You need JavaScript enabled to view it.
TIP!

Do you know these New Maxoline products already?

  • Turbine Oil R&O ISO VG 32

    Turbine Oil R&O ISO VG 32

    MAXOLINE Turbine Oil R&O ISO VG 32 is a universal mineral turbine oil, based on specially selected solvent-refined base oils. Especially formulated to satisfy the demanding requirements of modern high output steam turbines, including gear units. This oil is also recommended for industrial-type gas turbines. In addition to turbine applications, this oil may also be used to lubricate hydraulic systems, compressors, high-speed gears, certain oil-lubricated bearings and other applications requiring high quality rust and oxidation inhibited oils which separate readily from water.
  • Supersynth Motor Oil 0W20

    Supersynth Motor Oil 0W20

    MAXOLINE SUPERSYNTH high grade motor oil 0W20 is produced of high grade synthetic base oils with a high Viscosity Index and fortified with a top of the bill special selection of additives. A fuel economy, special high grade engine oil suitable for petrol and diesel engines where manufacturers prescribe a product meeting Volvo specification VCC RBS0-2AE with a viscosity SAE 0W20.
  • Compressor Oil H150

    Compressor Oil H150

    MAXOLINE Compressor Oil H150 i a blend of mineral paraffinic base oils with a low Conradson Carbon Residue, which is, because of the addition of a suitable additive package, the right oil for use in piston, vane and screw compressors, working with low, medium and high compression temperatures.
  • Silicone Oil 100 - 5223

    Silicone Oil 100 - 5223

    MAXOLINE high grade Silicone Oil 100 - 5223 is a 100% PDS (=Poly Dimethyl Siloxan), are insoluble in almost all petroleum systems. It is essntially a non-toxic product. To be applied/used for a wide range of applications: As a lubricating product, as a release agent, as an anti-foam agent, as mechanical fluid, in electronic equipment, etc.

Customer Login

Customers Only