Maxoline-logo-300

Regular Oil SAE 60

This product was rated through our customers

MAXOLINE Regular Oil SAE 60, also known as Commercial Motor Oil is a blend of HVI Base Oils. It is extremely resistant against aging.

Suitable for general lubrication under mild conditions, such like bearings of pumping stations, circulating systems and for topping-up of certain classic cars engines.

Why one should use Regular Oil SAE 60

Specifications

  • Specific Gravity 15°C: 0,900
  • Viscosity 40 °C mm²/s: 318
  • Viscosity 100 °C mm²/s: 23
  • Viscosity Index (V.I.): 96
  • Flash Point °C: 268
  • Pour Point °C: -8
  • SAE: 60

Performance Level

API: SA


H.S.code

27.10.19.81
CAAO288/31100

The data published are to our best knowledge the correct information. We reserve the right to alter the specifications any time and without prior notice.

Contact Information

  • Maxoline

    • Fokkinkweg 19
    • Hengelo Bronckhorst (Gld)
    • 7255 AJ
    • Netherlands
    • T: +31 575 46 12 13
    • F: +31 575 74 18 01
    • E: This email address is being protected from spambots. You need JavaScript enabled to view it.
TIP!

Do you know these New Maxoline products already?

  • Diesel Oil SAE 40

    Diesel Oil SAE 40

    MAXOLINE Diesel Oil SAE 40 is produced with high quality solvent refined base oils and various special additives. Suitable lubricating oil for gasoline engines under light service conditions, moreover for the diesel engines of passenger cars and for light delivery vans in light service.
  • Regular Oil SAE 30

    Regular Oil SAE 30

    MAXOLINE Regular Oil SAE 30, also known as Commercial Motor Oil is a blend of HVI Base Oils. It is extremely resistant against aging. Suitable for general lubrication under mild conditions, such like bearings of pumping stations, circulating systems and for topping-up of certain classic cars engines.
  • Soluble Cutting Oil Extra

    Soluble Cutting Oil Extra

    MAXOLINE Soluble Cutting Oil Extra is a sophisticated metal working fluid based on high quality solvent refined base oils and a suitable additive package. The ratio to be used is in practise 1 part oil to 9 parts water. Stir thoroughly to obtain a very stable emulsion. To be used for machining all normal metals. After a certain time and in certain conditions it can be necessary to add an extra bactericide to the system.

    Always add the metal working fluid to the water and not in the reverse order!

    Must be stored inside and above 0 degrees Celsius!

    Because of stability consume with one year!

Customer Login

Customers Only