Maxoline-logo-300

Silicone Oil 100 - 5223

This product was rated through our customers

MAXOLINE high grade Silicone Oil 100 - 5223 is a 100% PDS (=Poly Dimethyl Siloxan), are insoluble in almost all petroleum systems. It is essntially a non-toxic product.

To be applied/used for a wide range of applications: As a lubricating product, as a release agent, as an anti-foam agent, as mechanical fluid, in electronic equipment, etc.

Why one should use Silicone Oil 100 - 5223

Specifications

  • Specific Gravity 25°C: 0,964
  • Viscosity 25 °C mm²/s: 100
  • Viscosity temperature coefficient:: 0,60
  • Coefficient of expension, cc/cc/°C: 0,00096
  • Refractive Index: 1,4032
  • Surface tension 25 °C, dynes/cm: 21,0
  • Thermal conductivity 50 °C: -
  • Flash Point, open cup °C: >300
  • Pour Point °C: -63
  • Color, APHA: APHA: 5

H.S.code

39.10.00.00
COOA/279/5223

The data published are to our best knowledge the correct information. We reserve the right to alter the specifications any time and without prior notice.

Contact Information

  • Maxoline

    • Fokkinkweg 19
    • Hengelo Bronckhorst (Gld)
    • 7255 AJ
    • Netherlands
    • T: +31 575 46 12 13
    • F: +31 575 74 18 01
    • E: This email address is being protected from spambots. You need JavaScript enabled to view it.
TIP!

Do you know these New Maxoline products already?

  • Marine Guard Diesel Engine Oil 1230

    Marine Guard Diesel Engine Oil 1230

    MAXOLINE Marine Guard Diesel Engine Oil 1230 with excellent high temperature detergency and increased alkalinity reserve to neutralise residues originating from high sulphur content fuels. Suitable as system-oil of high- and low- speed marine diesel engines with or without turbo-charging and the the use of distillate diesel fuel. Also to be used is shipboard gearboxes.
  • Soluble Cutting Oil Extra

    Soluble Cutting Oil Extra

    MAXOLINE Soluble Cutting Oil Extra is a sophisticated metal working fluid based on high quality solvent refined base oils and a suitable additive package. The ratio to be used is in practise 1 part oil to 9 parts water. Stir thoroughly to obtain a very stable emulsion. To be used for machining all normal metals. After a certain time and in certain conditions it can be necessary to add an extra bactericide to the system.

    Always add the metal working fluid to the water and not in the reverse order!

    Must be stored inside and above 0 degrees Celsius!

    Because of stability consume with one year!

  • Super Gear Oil GL-5  LS  SAE 75W90

    Super Gear Oil GL-5 LS SAE 75W90

    MAXOLINE Super Gear Oil GL-5 LS 75W90 is formulated from high quality solvent refined base oils and special EP additive package. Especially developed for the lubrication of "Limited Slip" and Auto Locking" hypoid transmissions.

Customer Login

Customers Only