Maxoline-logo-300

Silicone Oil 500 - 5225

This product was rated through our customers

MAXOLINE high grade Silicone Oil 500 - 5225 is a 100% PDS (=Poly Dimethyl Siloxan), are insoluble in almost all petroleum systems. It is essntially a non-toxic product.

To be applied/used for a wide range of applications: As a lubricating product, as a release agent, as an anti-foam agent, as mechanical fluid, in electronic equipment, etc.

Why one should use Silicone Oil 500 - 5225

Specifications

  • Specific Gravity 25°C: 0,969
  • Viscosity 25 °C mm²/s: 500
  • Viscosity temperature coefficient:: 0,60
  • Coefficient of expension, cc/cc/°C: 0,00096
  • Refractive Index: 1,4034
  • Surface tension 25 °C, dynes/cm: 21,1
  • Thermal conductivity 50 °C: -
  • Flash Point, open cup °C: >300
  • Pour Point °C: -48
  • Color, APHA: APHA: 5

H.S.code

39.10.00.00
COOA/279/5225

The data published are to our best knowledge the correct information. We reserve the right to alter the specifications any time and without prior notice.

Contact Information

  • Maxoline

    • Fokkinkweg 19
    • Hengelo Bronckhorst (Gld)
    • 7255 AJ
    • Netherlands
    • T: +31 575 46 12 13
    • F: +31 575 74 18 01
    • E: This email address is being protected from spambots. You need JavaScript enabled to view it.
TIP!

Do you know these New Maxoline products already?

  • Hydra Oil ISO VG 32

    Hydra Oil ISO VG 32

    MAXOLINE Hydra Oil ISO VG 32 is a mineral oil based EP hydraulic oil for use in heavy duty hydraulic equipments, gear boxes and bearings. It may also be used as a lubrication medium in lubrication systems and vacuum pumps. Produced from high grade solvent neutral base oils and suitable EP additive and anti-foam package.
  • Supersynth Motor Oil SAE 5W30 API SH/CF

    Supersynth Motor Oil SAE 5W30 API SH/CF

    MAXOLINE SUPERSYNTH high grade motor oil SAE 5W30 is produced of high grade synthetic base oils with a high Viscosity Index and fortified with a special selection of additives. MAXOLINE SUPERSYNTH high grade motor oil SAE 5W30 is recommended for use in petrol and diesel engines, with or without turbo-charging, in passenger cars and delivery vans with extended oil drain intervals. The oil is contributing to extension of the lifetime of particle filters. Due to its special composition it is possible to apply the product for the VW 502.00/505.00 requirements.
  • Synthetic Compressor Oil ISO VG 100 (PAO)

    Synthetic Compressor Oil ISO VG 100 (PAO)

    Synthetic Compressor Oil ISO VG 100 (PAO) is a high quality fully synthetic compressor oil based on PAO base oils, with a natural high resistance against oxidation, to which a complete additive package has been added. Recommended for oil-flooded rotary sliding-vane and screw-type compressors, even in the most severe conditions. This oil has low carbon-forming tendencies and minimises the formation of deposits in the discharge system at the temperature range where these compressors operate. Due to the high quality of this compressor oil, mostly the service interval can be extended.

Customer Login

Customers Only