Maxoline-logo-300

Soluble Cutting Oil Extra

This product was rated through our customers

MAXOLINE Soluble Cutting Oil Extra is a sophisticated metal working fluid based on high quality solvent refined base oils and a suitable additive package. The ratio to be used is in practise 1 part oil to 9 parts water. Stir thoroughly to obtain a very stable emulsion. To be used for machining all normal metals. After a certain time and in certain conditions it can be necessary to add an extra bactericide to the system.

Always add the metal working fluid to the water and not in the reverse order!

Must be stored inside and above 0 degrees Celsius!

Because of stability consume with one year!

Why one should use Soluble Cutting Oil Extra

  • Good stability of the emulsion,
  • Low foaming properties,
  • Good protection against corrosion of metals

Specifications

  • Specific Gravity 15°C: 0,893
  • Viscosity 40 °C mm²/s: 35
  • Flash Point °C: 110
  • Pour Point °C: -18
  • Total Base Number mgKOH/g: 15,1
  • Nitrite: Nil

H.S.code

27.10.19.91
CAAQ237/4140

The data published are to our best knowledge the correct information. We reserve the right to alter the specifications any time and without prior notice.

Contact Information

  • Maxoline

    • Fokkinkweg 19
    • Hengelo Bronckhorst (Gld)
    • 7255 AJ
    • Netherlands
    • T: +31 575 46 12 13
    • F: +31 575 74 18 01
    • E: This email address is being protected from spambots. You need JavaScript enabled to view it.
TIP!

Do you know these New Maxoline products already?

  • Marine Guard Diesel Engine Oil 2040

    Marine Guard Diesel Engine Oil 2040

    MAXOLINE Marine Guard Diesel Engine Oil 2040 with excellent high temperature detergency and increased alkalinity reserve to neutralise residues originating from high sulphur content fuels. Suitable as system-oil of high- and low- speed marine diesel engines with or without turbo-charging and the the use of distillate diesel fuel with a sulphur content less than 1,8%. Also to be used in shipboard gearboxes.
  • Unitrac STOU 10W30

    Unitrac STOU 10W30

    MAXOLINE Unitrac STOU 10W30 is multifunctional lubricating oil for agricultural and earthmoving equipment, formulated with top-grade solvent refined base oils and additive package. Especially developed to provide one single product which is lubricating diesel- and gasoline- engines, (with or without turbo-charging), transmissions (also "wet" brakes) and hydraulic systems.
  • Synthetic Motor Oil SAE 10W40 API SN/CF

    Synthetic Motor Oil SAE 10W40 API SN/CF

    MAXOLINE Synthetic Motor Oil SAE 10W40 API SN/CF is produced of high grade solvent refined mineral base oils and synthetic base oils with a high Viscosity Index and fortified with a special selection of additives. A specially composed engine oil for use in petrol- and diesel- engines, with or without turbo-charging, in passenger cars and delivery vans..
  • Hydra Oil ZF 46

    Hydra Oil ZF 46

    MAXOLINE Hydra Oil ZF 46 is a Zinc-Free EP hydraulic oil based on high quality Solvent Refined Base Oils and a special additive package. To be used for heavy duty hydraulic equipment, light-duty gearboxes, bearings and also for lubrication systems, general lubrication and vacuum pumps (NOT for turbines!). MAXOLINE Hydra Oil ZF 46 can be used in systems with silver parts.

Customer Login

Customers Only