Maxoline-logo-300

Technical White Oil ISO VG 68

This product was rated through our customers

MAXOLINE Technical White Mineral Oil ISO VG 68 nearly odourless, almost tasteless, to be used as a base in the production of a wide range of products. As a lubricant in the textile, plastic and rubber industry, in the production of petroleum jellies, as a lubrication medium, etc., etc.

Why one should use Technical White Oil ISO VG 68

  • Base carrier in plastic, rubber and chemical industries,
  • Lubricant in precision machining, sewing machines and other textile machines,
  • Carrier for insecticides industry

Specifications

  • Specific Gravity 15°C: 0,867
  • Colour Saybolt: +28
  • Viscosity 40 °C mm²/s: 68
  • Odour: Negligible
  • Taste: Negligible
  • Flash Point °C: 198
  • Pour Point °C: -10

Performance Level

FDA 21 CFR 178.3620 (b) and FDA 21 CFR 573.680


H.S.code

27.10.19.85
CAAO310/13229

The data published are to our best knowledge the correct information. We reserve the right to alter the specifications any time and without prior notice.

Contact Information

  • Maxoline

    • Fokkinkweg 19
    • Hengelo Bronckhorst (Gld)
    • 7255 AJ
    • Netherlands
    • T: +31 575 46 12 13
    • F: +31 575 74 18 01
    • E: This email address is being protected from spambots. You need JavaScript enabled to view it.
TIP!

Do you know these New Maxoline products already?

  • Automatic Transmission Fluid A.T.F. type Dexron III H 4123

    Automatic Transmission Fluid A.T.F. type Dexron III H 4123

    MAXOLINE Automatic Transmission Fluid type Dexron III H is a modern, Automatic Transmission and Power Steering Fluid formulated from highly refined solvent neutrals fortified with the suitable additive package, for use in a wide range of automatic transmissions, power steering and other units, for which the use of Dexron III/H fluids are required.
  • Turbine Oil XT ISO VG 32

    Turbine Oil XT ISO VG 32

    MAXOLINE Turbine Oil XT ISO VG 32 is a universal mineral turbine oil, based on specially selected and highly raffinated Group II base oils. Especially formulated to satisfy the demanding requirements of modern high output steam-, gas- and water turbines. Because of its composition is this turbine oil specially suitable for long service life. In addition to turbine applications is this oil also suitable for the lubricating of hydraulic systems, compressors, high-speed gears and certain bearings and other applications requiring high quality rust and oxidation inhibited oils which separate readily from water.
  • Spindle Oil ISO VG 22

    Spindle Oil ISO VG 22

    MAXOLINE Spindle Oil ISO VG 22 is a Paraffinic Mineral Oil with a natural oxidation stability. This oil has a high viscosity index and contains no additives and a low percentage of aromatic hydrocarbons. A Spindle Oil for not loaded gearboxes and bearings and also suitable for general lubrication and for circulation systems, where an un-doped oil is asked or prescribed.
  • Cylinder Oil Circo 1300

    Cylinder Oil Circo 1300

    Cylinder Oil Circo 1300 is a Mineral oil of high quality which contains no further additives

    Always check requirements in manual of equipment builder!

Customer Login

Customers Only