Maxoline-logo-300

Unitrac STOU 15W30

This product was rated through our customers

MAXOLINE Unitrac STOU 15W30 is multifunctional lubricating oil for agricultural and earthmoving equipment, formulated with top-grade solvent refined base oils and additive package. Especially developed to provide one single product which is lubricating diesel- and gasoline- engines, (with or without turbo-charging), transmissions (also "wet" brakes) and hydraulic systems.

Why one should use Unitrac STOU 15W30

  • High and stable viscosity index
  • Powerful dispersion and detergency
  • High activity against wear, corrosion and foam
  • Excellent Extreme Pressure properties
  • Strong resistance to oxidation

Specifications

  • Specific Gravity 15°C: 0,883
  • Viscosity 40 °C mm²/s: 76,60
  • Viscosity -25 °C, mPa.s: 6000
  • Viscosity 100 °C mm²/s: 10,55
  • Viscosity Index (V.I.): 121
  • Flash Point °C: 219
  • Pour Point °C: -34
  • Total Base Number mgKOH/g: 11,30
  • Sulphate Ash, %: 1,45

Performance Level

API SF/CG-4 GL-4 ACEA E3

Meets the requirements of:

M.F. M1135, M1139, M1143, M1144 and M1145

John Deere J20C,

Ford M2C134-D, M2C159-C,

Allison C4, ZF TE-ML 06B/07B


H.S.code

27.10.19.81
CAAO239/31183

The data published are to our best knowledge the correct information. We reserve the right to alter the specifications any time and without prior notice.

Contact Information

  • Maxoline

    • Fokkinkweg 19
    • Hengelo Bronckhorst (Gld)
    • 7255 AJ
    • Netherlands
    • T: +31 575 46 12 13
    • F: +31 575 74 18 01
    • E: This email address is being protected from spambots. You need JavaScript enabled to view it.
TIP!

Do you know these New Maxoline products already?

  • MP Gear Oil SAE 80W90

    MP Gear Oil SAE 80W90

    MAXOLINE MP Gear Oil SAE 80W90 is formulated with high quality Solvent Refined Base Oils and special EP additive package. This oil has been especially developed for use in all transmissions that require EP Transmission Oils.
  • Turbine Oil R&O ISO VG 32

    Turbine Oil R&O ISO VG 32

    MAXOLINE Turbine Oil R&O ISO VG 32 is a universal mineral turbine oil, based on specially selected solvent-refined base oils. Especially formulated to satisfy the demanding requirements of modern high output steam turbines, including gear units. This oil is also recommended for industrial-type gas turbines. In addition to turbine applications, this oil may also be used to lubricate hydraulic systems, compressors, high-speed gears, certain oil-lubricated bearings and other applications requiring high quality rust and oxidation inhibited oils which separate readily from water.
  • Ultra HD Motor Oil 10W40

    Ultra HD Motor Oil 10W40

    MAXOLINE Ultra HD Motor Oil 10W40 is formulated from solvent refined base oils and a well-balanced additive package, suitable for gasoline and diesel engines, normal or turbo-aspirated, even under the toughest operation conditions. Because of the use of a special additive package these oils may be used if fuels contain high sulphur contents. These special oils have been mainly developed tom allow extended oil drain intervals and to prevent "bore polishing" (cylinder wear ) in diesel engines. Suitable for application in EURO 3 and 4 engines.
  • Synthetic Gear Oil ISO VG 320

    Synthetic Gear Oil ISO VG 320

    MAXOLINE Synthetic Gear Oil ISO VG 320 is a synthetic based, high performing gear lubricant to be used in industrial equipment. It has been formulated to withstand heavy loads ans severe conditions resulting in very good micro pitting resistance.

Customer Login

Customers Only