Products tagged with CUTTING

Honing Oil 41441

MAXOLINE HONING OIL 41441 is based on hydro treated mineral base oils, with the addition of special mist reducing and anti-wear additives.
  • Compare this product:

Neat Cutting Oil Multipurpose

MAXOLINE Neat Cutting Oil Multipurpose is a cutting oil based on high quality hydro treated mineral base oils and a special mist reducing and anti wear additive package. To be used undiluted for cutting and boring of alloyed steels with a high tensile strength, but also suitable for non-ferro and light metals.
  • Compare this product:

Soluble Cutting Oil Extra

MAXOLINE Soluble Cutting Oil Extra is a sophisticated metal working fluid based on high quality solvent refined base oils and a suitable additive package. The ratio to be used is in practise 1 part oil to 9 parts water. Stir thoroughly to obtain a very stable emulsion. To be used for machining all normal metals. After a certain time and in certain conditions it can be necessary to add an extra bactericide to the system.

Always add the metal working fluid to the water and not in the reverse order!

Must be stored inside and above 0 degrees Celsius!

Because of stability consume with one year!

  • Compare this product:

Contact Information

  • Maxoline

    • Fokkinkweg 19
    • Hengelo Bronckhorst (Gld)
    • 7255 AJ
    • Netherlands
    • T: +31 575 46 12 13
    • F: +31 575 74 18 01
    • E: This email address is being protected from spambots. You need JavaScript enabled to view it.
TIP!

Do you know these New Maxoline products already?

  • Marine Guard Diesel Engine Oil 7050

    Marine Guard Diesel Engine Oil 7050

    MAXOLINE Marine Guard Diesel Engine Oil 7050 with excellent high temperature detergency and increased alkalinity reserve to neutralise residues originating from high sulphur content fuels. Suitable as system-oil of high- and low- speed marine diesel engines with or without turbo-charging and the the use of distillate diesel fuel. Also to be used is shipboard gearboxes.
  • Industrial Gear Lube EP 320

    Industrial Gear Lube EP 320

    MAXOLINE Industrial Gear Lube EP 320 is a mineral oil based Gear Oil. The additive package is absolutely lead free. * Always check requirements in manual of equipment builder!
  • Supersynth Motor Oil SAE 5W30 API SH/CF

    Supersynth Motor Oil SAE 5W30 API SH/CF

    MAXOLINE SUPERSYNTH high grade motor oil SAE 5W30 is produced of high grade synthetic base oils with a high Viscosity Index and fortified with a special selection of additives. MAXOLINE SUPERSYNTH high grade motor oil SAE 5W30 is recommended for use in petrol and diesel engines, with or without turbo-charging, in passenger cars and delivery vans with extended oil drain intervals. The oil is contributing to extension of the lifetime of particle filters. Due to its special composition it is possible to apply the product for the VW 502.00/505.00 requirements.
  • Super Gear Oil GL-5  LS  SAE 75W90

    Super Gear Oil GL-5 LS SAE 75W90

    MAXOLINE Super Gear Oil GL-5 LS 75W90 is formulated from high quality solvent refined base oils and special EP additive package. Especially developed for the lubrication of "Limited Slip" and Auto Locking" hypoid transmissions.

Customer Login

Customers Only