Maxoline-logo-300

HD Diesel Engine Oil 15W40 CI-4

This product was rated through our customers

MAXOLINE HD DIesel Engine Oil 15W40 CI-4 is a universally applicable engine oil, based on the officially approved formulas, using the same high-quality additives, but the base oils have been replaced with equivalent alternatives. This creates equivalent products in terms of quality, with a performance level corresponding to the originally approved products. However, because no field tests have been conducted, the product may be claimed only to meet the mentioned performance levels.

Why one should use HD Diesel Engine Oil 15W40 CI-4

This engine lubricant is applicable to gasoline and diesel engines (normally- or turbo-aspirated) even under the toughest operation conditions and all the year round. This engine oil has a special additive system and may therefore be used, when fuels with relatively high sulphur contents are involved. This product is suitable for application in Euro 4 and Euro 5 engines.

Specifications

  • Specific Gravity 15°C: 0,877
  • Viscosity 40 °C mm²/s: 106
  • Viscosity -20 °C, mPa.s: 6500
  • Viscosity 100 °C mm²/s: 13,90
  • Viscosity Index (V.I.): 132
  • Flash Point °C: 210
  • Pour Point °C: -35
  • Total Base Number mgKOH/g: 11,1
  • SAE: 15W40
  • Sulphate Ash, %: 1,43

Performance Level

API CI-4/SL, ACEA E7 Meeting the requirements of: MAN M 3275-1, Volvo VDS-3, MB 228.3 MTU type 2, Renault VI RLD/RLD-2, Mack EO-N/EO-M Plus, Cummins CES 20077/20078 Cat ECF-1-a/ECF-2, Deutz DQC III-10, ZF TE-ML 07C Detroit Diesel 93K215, Global DHD-1, Jaso DH-1,

H.S.code

27.10.19.81
CAAS101/31178

The data published are to our best knowledge the correct information. We reserve the right to alter the specifications any time and without prior notice.

Contact Information

  • Maxoline

    • Fokkinkweg 19
    • Hengelo Bronckhorst (Gld)
    • 7255 AJ
    • Netherlands
    • T: +31 575 46 12 13
    • F: +31 575 74 18 01
    • E: This email address is being protected from spambots. You need JavaScript enabled to view it.
TIP!

Do you know these New Maxoline products already?

  • HD Fleet Oil SAE 10W20

    HD Fleet Oil SAE 10W20

    MAXOLINE HD Fleet Oil SAE 10W20 is a universal engine oil formulated from high grade solvent neutral base oils and a well-balanced additive package resulting in products suitable to be used in gasoline as well as diesel engines, with or without supercharging, under all operating conditions.
  • MP Gear Oil SAE 80W90

    MP Gear Oil SAE 80W90

    MAXOLINE MP Gear Oil SAE 80W90 is formulated with high quality Solvent Refined Base Oils and special EP additive package. This oil has been especially developed for use in all transmissions that require EP Transmission Oils.
  • Supersynth Motor Oil SAE 5W30 API SH/CF

    Supersynth Motor Oil SAE 5W30 API SH/CF

    MAXOLINE SUPERSYNTH high grade motor oil SAE 5W30 is produced of high grade synthetic base oils with a high Viscosity Index and fortified with a special selection of additives. MAXOLINE SUPERSYNTH high grade motor oil SAE 5W30 is recommended for use in petrol and diesel engines, with or without turbo-charging, in passenger cars and delivery vans with extended oil drain intervals. The oil is contributing to extension of the lifetime of particle filters. Due to its special composition it is possible to apply the product for the VW 502.00/505.00 requirements.
  • Ultra HD Motor Oil 10W40

    Ultra HD Motor Oil 10W40

    MAXOLINE Ultra HD Motor Oil 10W40 is formulated from solvent refined base oils and a well-balanced additive package, suitable for gasoline and diesel engines, normal or turbo-aspirated, even under the toughest operation conditions. Because of the use of a special additive package these oils may be used if fuels contain high sulphur contents. These special oils have been mainly developed tom allow extended oil drain intervals and to prevent "bore polishing" (cylinder wear ) in diesel engines. Suitable for application in EURO 3 and 4 engines.

Customer Login

Customers Only