Je bent hier:
Soluble Cutting Oil Extra
MAXOLINE Soluble Cutting Oil Extra is a sophisticated metal working fluid based on high quality solvent refined base oils and a suitable additive package. The ratio to be used is in practise 1 part oil to 9 parts water. Stir thoroughly to obtain a very stable emulsion. To be used for machining all normal metals. After a certain time and in certain conditions it can be necessary to add an extra bactericide to the system.
Always add the metal working fluid to the water and not in the reverse order!
Must be stored inside and above 0 degrees Celsius!
Because of stability consume with one year!
- Good stability of the emulsion,
- Low foaming properties,
- Good protection against corrosion of metals
| Article number | CAAQ237/4140 |
|---|---|
| H.S.Code | 27.10.19.91 |
| Specific Gravity 15°C | 0,893 |
| Viscosity 40 °C mm²/s | 35 |
| Flash Point °C | 110 |
| Pour Point °C | -18 |
| Total Base Number mgKOH/g | 15,1 |
The data published are to our best knowledge the correct information. We reserve the right to alter the specifications any time and without prior notice.